LED Plant Grow Lamp structure requirements

1, structure

The Led Plant Grow Lamp structure is based on compliance with UL1598, also need to achieve the following:

If the LED Lamp housings or bezels are plastic and the housings are exposed to sunlight or light, the plastic used shall be UV resistant (ie with (f1)) as required by UL 1598 16.5.5 or UL 746C.

2, the use of the environment

Must be Damp wet or Wet outdoor.

3, IP54 dust and water level

Installation instructions must reflect the use of the environment, and require at least IP54 dust and water level (according to IEC60529).
4, the lamp can not issue harm to the human body light